Домашн » Softwares

4 конца форматизации изображения использующ сочинителя в реальном маштабе времени Windows

Blogs используют больше изображений например фотоий или blog еды должно принять преимущество новых характеристик изображения введенных в варианте сочинителей в реальном маштабе времени самом последнем. В последнем столбе я должен использовать серию изображений для того чтобы дать ясную идею. Выравнивая изображения, добавляющ влияния цвета как sepia и добавляющ, что watermark избежал других людей сразу копируя или используя ваше изображение некоторые из характеристик которые мы можем использовать и даем импрессивный столб к нашим читателям. Препятствует для того чтобы получить, что суметь как использовать его.

Концы изображения для Windows живут сочинитель

Примечание: В случае если вы считаете изображения мало, щелкните дальше им и они передадут вам более лучший взгляд.

Выравнивая изображения #1 к центру:

Не будет сразу дороги устанавливать изображения к центру по мере того как имеющиеся варианты встроенны, left and right. Люди удобно с бирками HTML могут как раз установить a центр бирка вокруг ее. Для людей надевает? t хочет mess с им - попытайтесь эта малая выходка.

  • После вводить вас изображение, напишите право текста под им. Теперь выберите изображение и текст совместно.
  • Пойдите к Форма > Выровняйте и вы увидите разбивочный включенный текст . Щелкните дальше им.
  • Теперь если вы имеете привычку класть текст под давление, то изображений (хорошо) справедливое войдите и выровняйте его back to левая сторона.
  • If not, извлекайте текст, давление вписывает и установило выравнивание back to левая сторона. Проверите как я сделал в изображениях.
Изображение после введено внутри столба

Изображение после введено внутри столба

#2 использующ плату изображения в свойствах изображения

Когда вы выбираете изображение, sidebar изменения к свойствам изображения. Теперь это имеет 3 платы - выдвинутое изображение, и Affects.Here мы обсудим о изображении Tab.

  • В Оборачивать текста , Вы получаете варианты для Inline, left and right. Если вы хотите центр, то выровняйте пожалуйста последуйте за вышеуказанным trick.
  • В Допустимые пределы , Вы можете пойти для custom допустимых пределов. Они ничего но сделать некоторые космосы вокруг изображения. This avoids mixing of image with the surrounding element.
  • In Border, You get three options
    • Drop Shadow - To give a shadow affect to your image. Check the first image above.
    • Photo Wrapper - This gives you a small white frame around the image which looks similar to photo print we take out. I would recommend this one.Check the image below.
    • Inherit from Blog: This will simply use the same settings which your blog theme is containing.
    • None: This will override all the things and will have no settings. Avoid using it.
  • In Link to, This is a useful feature which I realized later.
    • The first step is normal where you an link to an image or any URL.
    • Now if you are showing a smaller image here and want to show a bigger when clicked. Just click on Options button which is located right there. This will give a option to choose and set a size. ( This concept is similar to what wordpress attachment does but gives more flexibility on the size display.) to display when clicked

#3 Using Advanced Tab in Image Properties

The advanced tab gives you options to set image size , rotate the picture and adjust the contrast. Moreover the ?alt? text which is very important for images to get into search engines is present under Alternate Text. never forget to add it.

Important thing to notice here is , Under image size you can predefine your image size settings, This works great again for people who deal with images more. You can set the maximum size according to your image resolution which will come very handy.

Advanced Image Tab in WLW

Advanced Image Tab in WLW

#4 Using Effects Tab in Image Properties

In case you want add effects like Black and White, Sepia Tone and Color pop. This is a right place.

  • Go to Effects and there You will see Green plus button and Red minus button.
  • This will gibe you two options, Adding Transformations and Overlays like Watermark.
  • If you have noticed, I had been adding my blog name in every image. In case you don?t want to others to use your photograph, add with your custom name. This will make the sploggers at least think once.

Some of the features you might find it easy to use and could have not been mentioned. I was skipping too but then I thought it will serve a better continuation for beginners who come from the configuration article for live writer. I would like to hear if you have any more tricks on using images with windows live writer. Do share with us in comments. I would accept one thing, writing a list article is very tiring.

Tags: , ,

Translate to EnglishÜbersetzen Sie zum Deutsch/GermanΜεταφράστε στα ελληνικά/GreekПереведите к русскому/RussianOversetter til Norsk/NorwegianÖversätta till Svensk/Swedishहिन्दी अनुवाद करने के लिए/Hindi
Tradueix al català/CatalanTulkot uz latviešu/LatvianPreložiť do slovenčiny/SlovakVertaal aan het Nederlands/Dutchترجمة الى العربية/ArabicTraduzca al Español/SpanishTraduisez au Français/French
Traduca ad Italiano/ItalianTraduza ao Português/Portuguese日本語に翻訳しなさい /Japanese한국어에게 번역하십시오/Korean中文翻译/Chinese Simplified中文翻译/Chinese TraditionalПереклад на українську/Ukrainian
We Recommend : Click here to run a Free Performance scan
SMS subscribe Print This Post

Posted on 16th September 2007 by Ashish Mohta , A tech blogger who writes about solving day to day problems of people who use computer. He also writes on How to use the applications like Office, PC tips, Online tools,Browsers and more. All posts by Ashish Mohta | Connect with me @ Twitter | Linkedin | Facebook | Stumble | Need more help? Ask your Questions at our Support Center



3 Comments »

  • Kelly Carter said:

    When I insert an image using WLW, I want my default settings to be: Image Size=Original, Link to=None, Borders=Insert from weblog. Is there any way to change these default settings?

  • Mako said:

    Hi Kelly,
    I had the same problem and found a solution: if you alter the settings of an image you will see the option “save settings as default” in the lower right corner.
    Cheers,
    Mako

Leave your response!

Be nice. Keep it clean. Stay on topic. No spam.

You can use these tags:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>